👀 SAMPLE REPORT — this is an example of the professional Reisch measurement report you receive. Yours is built from professional measurements of YOUR property.
312 Sunset Road, Pompton Plains NJ 07444
(855) 734-7241 · reischroofing.com
NJ · NY · PA — Licensed & Insured
ROOF MEASUREMENT REPORT
PRECISION AERIAL TAKEOFF · PER-FACET MEASUREMENT & EDGE ANALYSIS
123 Sample Street, Pompton Plains, NJ 07444
Report RTR-20260730-1356 · Prepared July 30, 2026 · Confidence 85% (auto-measured)
Aerial imagery: Esri World Imagery · roof outline approximate
Measurement Summary
| Total Roof Area (sloped surface) | 2,755 sq ft |
| Total Squares | 27.6 |
| Suggested Waste Factor | ×1.27 (27%) |
| Squares incl. Waste | 35.0 |
| Predominant Pitch | 10/12 |
| Roof Facets | 12 |
| Ridges / Hips (combined) | 63 LF |
| Valleys | 40 LF |
Report Details
| Rakes | 83 LF ◆ |
| Eaves | 139 LF ◆ |
| Step / Wall Flashing | 25 LF |
| Imagery Date | 2023-09-03 |
| Imagery Quality | HIGH |
| Measurement Confidence | 85% |
GAF Master Elite (top 2% nationwide) · CertainTeed ShingleMaster Pro · Owens Corning Preferred · IKO Certified · HAAG Certified Inspector · NJ HIC #13VH09822200
Lengths Diagram
123 Sample Street, Pompton Plains, NJ 07444
RTR-20260730-1356
Facet layout is approximate (auto-measured from aerial imagery); lengths and areas are computed from the 3-D roof-plane model and verified on site before installation.
EavesRakesRidgesHipsValleysStep / Wall Flashing
ROOF-GEOMETRY ENGINE (85% confidence) — edge lengths computed from the building's reconstructed roof-line network (footprint straight-skeleton + roof-plane data), calibrated against 297 GAF professional aerial measurement ground-truth reports. Interior lines on the diagram are the engine's reconstruction.
Edge Totals
| Eaves ◆ | 139 LF |
| Rakes ◆ | 83 LF |
| Ridges / Hips (combined) | 63 LF |
| Valleys | 40 LF |
| Step / Wall Flashing | 25 LF |
Derived Material Lengths
| Drip Edge (eaves + rakes) | 222 LF |
| Ridge Cap (ridges + hips) | 63 LF |
| Starter Strip (eaves) | 139 LF |
| Starter — GAF convention (eaves + rakes) | 222 LF |
| Leak Barrier — GAF (eaves + rakes + valleys + flash + hips) | 299 LF |
| Valley Lining (valleys) | 40 LF |
| Hip Count / Valley Count | 12 / 4 |
Edge lengths are measured along the slope (sloped length) for rakes, hips and valleys, and horizontally for eaves and ridges — the same convention used by industry aerial measurement reports.
◆ Measured from the building's public GIS footprint outline (OpenStreetMap / FEMA USA Structures) — perimeter-grade accuracy.
Waste Calculation & Notes
123 Sample Street, Pompton Plains, NJ 07444
RTR-20260730-1356
Waste Calculation
| Waste Scenario | Total Area | Squares |
|---|
| Zero waste (measured) | 2,755 sf | 27.6 |
| +4% | 2,865 sf | 28.7 |
| +9% | 3,003 sf | 30.0 |
| +14% | 3,140 sf | 31.4 |
| +19% | 3,278 sf | 32.8 |
| +27% — SUGGESTED (Reisch complexity tier) | 3,498 sf | 35.0 |
The suggested waste factor (×1.27) follows roof complexity — 12 hip(s) and 4 valley(s) detected. Simple gable roofs run 12%; cut-up roofs with multiple hips/valleys/dormers run up to 27%. Final material order is confirmed at contract.
How These Measurements Were Made
This report was produced by Reisch Roofing's aerial measurement system. Roof geometry is derived from high-resolution stereo aerial imagery: each roof plane (facet) is reconstructed individually with its own pitch, orientation and elevation, every edge is classified (eave, rake, ridge, hip, valley, wall flashing), and sloped lengths/areas are computed from the 3-D plane model — the same methodology used by industry-standard aerial takeoff reports. Eave and rake lengths were measured from the building's public GIS footprint outline (OpenStreetMap / FEMA USA Structures), giving perimeter-grade accuracy on those edges. Imagery date: 2023-09-03 (2.9 years old). † Small steep facets are displayed at the area-weighted pitch of their steep cluster — satellite stereo tends to over-read pitch on small steep planes; verified on site.
Measurement Confidence by Category
| Measurement | Confidence | Notes |
|---|
| Total area / squares | High | Derived from the building outline; validated against professional aerial reports |
| Eaves (gutter lines) | High | Measured from the roof outline |
| Ridges & hips | Moderate–High | Computed from the 3-D roof-plane model; unbiased on average |
| Valleys | Moderate | May under-read on roofs with dormers or porch roofs |
| Rakes (gable edges) | Indicative | Gable detection from overhead imagery is inherently limited — professional report or on-site verification recommended |
Confidence tiers are derived from ongoing validation of this system against 500+ professional aerial-measurement reports on New Jersey homes. Where a category matters to your project (for example valley or gable work), Reisch verifies with a professional report or on-site measurement before contract.
Important Notes
1. Measurements are derived from aerial imagery and are intended for estimating purposes. Reisch Roofing verifies all critical dimensions on site before installation.
2. This is a measurement report only — it is not a quote, contract, or scope of work, and contains no pricing.
3. Concealed conditions (deck condition, layers, framing) cannot be determined from aerial imagery.
4. © 2026 Reisch Roofing and Construction LLC. Prepared for the property owner of record at the address above.
Reisch Roofing and Construction LLC
312 Sunset Road, Pompton Plains NJ 07444
Office (855) 734-7241 · Cell 908-229-5883
reischroofing@gmail.com · reischroofing.com
“There is no better way than the REISCH way!”
Get yours
Order professional accurate measurements right from your Instant Quote:
$99 roof ·
$90–$130 siding (by home size) ·
$149 roof + siding. Delivered in 1–2 business days — and the fee is
credited toward your project if you hire Reisch. Even if you don’t go with us, you’ll own accurate verified measurements you can put in front of any contractor.
Get my instant quote →Financing available: flexible monthly payments through Hearth, our financing partner — apply online in about 2 minutes at https://app.gethearth.com/partners/reisch-roofing-and-construction. Checking your options does not affect your credit.